Custom or standard, Smalley takes great pride in its unparalleled dedication to delivering quality wave spring solutions for a variety of industries. Both wave springs and traditional coil springs fall under the category of compression springs. While the primary function of a compression spring is to provide axial load, wave springs have a few key differences and advantages when compared to coil springs.
The key advantage of using a wave spring is in the axial space savings. Whether it is a static or dynamic application, wave springs may be the ideal solution where space is a constraint. Mega Coil
The apparent difference between a wave spring and a coil spring is the height. A wave spring can provide the same force and deflection as a coil spring but in considerably less axial space. Wave springs have up to a 50% reduced height, mainly because of the following two design features:
Coil springs are typically made of round wire, while wave springs use flat wire. Flat wire takes up less vertical space than round wire, which contributes to the reduction in work height.
Just as the name implies, a wave spring has multiple waves per turn. The wave design contributes to the load output of the spring. In the image below, we have a flat wire coil spring, a traditional coil spring, and a wave spring, respectively.
Because a flat wire coil spring has a thinner cross-section in comparison to the coil spring, a taller free height is required to achieve a similar load output. On the other hand, a wave spring also has a thin cross-section, yet has the lowest free height. This is due to the unique Crest-to-Crest design, which allows for similar spring rates to a coil spring, but with axial space-saving capabilities.
Now that you understand the most notable difference between a coil spring and a wave spring, let’s go over some commonly asked questions.
The difference between a wave spring and a coil spring lies in the way they store and release energy. Wave springs rely on bending, similar to a simple beam, whereas coil springs are torsional. As a load is applied, the waves on the wave spring begin to flatten to provide an upward force, allowing for complete axial load transmission. Coil springs, on the other hand, twist as they compress, so not all the force is necessarily aligned with the axis.
Bottom line? Wave springs may potentially have a higher piece price, but overall cost savings may be seen when designing a wave spring into your application.
Other applications where an alternative spring should be used is in cases where extension or torsion is required. Wave springs are designed for compression only.
Interested in learning more about wave springs? Check out our new E-Book below.
Browse the most current issue of Design World and back issues in an easy to use high quality format. Clip, share and download with the leading design engineering magazine today.
Top global problem solving EE forum covering Microcontrollers, DSP, Networking, Analog and Digital Design, RF, Power Electronics, PCB Routing and much more
The Engineering Exchange is a global educational networking community for engineers. Connect, share, and learn today »
Metal Injection Molding Copyright © 2024 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media Privacy Policy | Advertising | About Us